No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive.
22 x 11-10 K3012
Front Caster Tires
13 x 6.5-5 smooth-tread, pneumatic.
.375" thick caster yoke arms.
Unibody, riveted 10-guage steel.
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Lever-actuated pawl brake.
Commercial grade, high back contoured foam padded with arm rests. Hinged mounting and spring suspension. Adjustment is fore and aft for operator position.
12 volt battery with 15-amp alternator
Engine hour meter, cup holder and hitch
Standard Engine Manufacturer's air filter
3-gallon (11.0-L), single fuel tank with single fill locations
Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Operator Presence Controls (OPC) and drive system interlock.
Optional Rigid ROPS with seat belt and latch.
Electromagnetic 105-ft-lb clutch
Drive Wheel Release
Allows unit movement without engine running.
Width / Cutting Deck
Deck Style Description
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed
Approximately 18,500 fpm.
1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat.
3 Blades at 16.25" Length
59.5 in. (151.0 cm)
76.0 in. (193.0 cm)
47.6 in. (121.0 cm)