Turf Tracer X-Series EFI
Large properties. Small properties. Tight spaces. Ornate landscaping. Whether you’re looking for a large walk behind with all of the bells and whistles or something a bit more modest, the Turf Tracer EFI X-Series is the family to turn to. All Exmark walk-behinds are designed to be incredibly productive, delivering a one-of-a-kind cut with each pass. These machines are built to last, taking on the toughest mowing conditions without breaking a sweat. They’ll have you easily maneuvering on hillsides, around flower beds, and anything else that can end up on the lawn. These EFI mowers are available with 52- or 60-inch cutting decks.
Turf Tracer X-Series EFI Features
Reduces fuel consumption, fewer emissions and carbon footprint.
Delivers up to 25% in fuel savings.
Reduce Green House Gases
Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
Easy to Start
Easy start in any altitude or climate condition (no manual choke).
Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
Sequential Fuel Injection
Delivers the precise amount of fuel and spark where needed to maximize efficiency and power.
- Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
- Casters .38" thick caster yoke arms
- Front Caster Tires 11 x 4.0-5, smooth tread, semi-pneumatic.
- Drive Tires 18 x 8.5-8, 4-ply Turf Master®
- Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
- Parking Brake Lever-actuated mechanical compression.
- Electrical 12-volt battery with 20-amp alternator.
- Standard Features Enhanced engine hour meter
- UPC 193308000138
- Engine Model ECV650
- Engine Brand Kohler
- Engine Series Command™ EFI
- Engine Speed 3,600 rpm
- Air Filter Heavy-duty canister air filtration system
- Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54cm) tapered shafts.
- Speed Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse.
- PTO Engagement Electromagnetic 200 ft-lbs clutch.
- Fuel Capacity 5-gallon (18.9-L) fuel tank.
- Drive Wheel Release Allows unit movement without engine running.
- Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
- Fuel System Electronic Fuel Injected
- Engine Displacement 694
- Engine HP* 21*
- Drive Hydro-Drive
- Fuel Indicator None
- Carb Compliant Yes
- Fuel Type Gas EFI
- Engine Spec 3017
- *The gross horsepower of gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
- Deck Style Floating Deck
- Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
- Width / Cutting Deck 52"
- Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.
- Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
- Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
- Blade Tip Speed Approximately 18,500 fpm.
- Blades 3 Blades at 18.00" Length
- Width 64.8 in. (164.6 cm)
- Length 84.8 in. (215.4cm)
- Height 45.0 in. (114.3 cm)
- Curb Weight 720
Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.) 116-7042 spacer adapter required for 36" deck models.
Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.
The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.
Operator Controlled Discharge (Hand)
The infinitely adjustable blocker door opens and closes, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.
Hydro Maintenance Kit
Kit includes: 3 quarts of Exmark® Premium Hydraulic Oil and 1 Hydro Filter
Anti Scalp Roller Kit
Provides maximum protection from scalping in tough terrain.
Exmark’s StandOn features a convenient spring loaded latch and an expanded operator deck that provides a more comfortable and productive mowing experience.
Turf Striping Kit
Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.
Turf Tracer EFI Warranty
We have you coveredDownload PDF